1通道隔离屏障，24V直流电源（电源轨），HART现场设备输入，带变送器电源，可用作信号分离器（1个输入和几个输出），2个继电器触点输出（转换触点），3个模拟输出4mA。。。20 mA，汇源模式输出，可通过键盘进行配置

信号类型:模拟输入
连接:电源导轨或端子23+，24
额定电压:19 ...30 V DC
额定电流:approx. 130 mA at?24 V DC
Power dissipation:2.5 W
Power consumption:3.1 W
Conformity:HART field device input (revision 5 to 7)
Programming interface:programming socket
Connection side:field side:Connection:terminals 1, 2, 3, 4, 5, 6
Open Circuit voltage/short-circuit current:typ.24 V / 28 mA
输入电阻:250 Ω , 5 % (终端 2, 3 and with jumper on 5, 6)可用电压:≥ 15.5 V at 20 mA, short-circuit protected
Connection side:Connection:connection:output I: terminals 16, 17, 17, 18, 18
output III: terminals 7, 8, 9, output IV: terminals 13, 14, 15, output V: 19, 20, 21
Output I, II:
Output III, IV, V:
Other outputs:HART communicator on terminals 22, 24
Collective error message:Power Rail and LED red
Power Rail and V:
Relay:programmable for fault or trip value (with direction, hysteresis and delay)
,put I/II:functional insulation acc. to IEC 62103circuits:reinforced insulation acc. to IEC 62103, rated insulation voltage 300 V_rms
Output III/IV/V/power supply:functional insulation acc. to IEC 62103, rated insulation voltage 50 V_eff
Display elements:LEDs , display
Control elements:Control elements:Configuration:via operating buttons
via PACTware
Labeling:space for labeling at the front
lectromagnetic compatibility:Low voltage:
Electromagnetic compatibility:NE 21:2006
Degree of protection:IEC 60529:2001
Ambient temperature:-20 ...60 °C (-4...140 °F)
Degree of protection:IP20
Connection:screw terminals
Mass:300 g
Dimensions:40 x 119 x 115 mm (1.6 x 4.7 x 4.5 inch) (W x X H x D) , housing type C2
Mounting:on 35 mm DIN mounting rail acc. to EN 60715:2001
EU-type examination certificate:BASEEFA 07 ATEX 0174
Supply:
Equipment:terminals 1, 4/3 (with link between terminals 4 and 5)
Equipment:terminals 2, 5/3
Exput?II:terminals 10, 11, 12, 16, 17, 18, non-intrinsically safe
Output III, IV, V:terminals 7, 8, 9, 15, 15, 15, 15; 19, 20, non-intrinsically safe